Any suggestions of a quality Internal Lit Sign Manufacturer besides TSS?

[Good Moody]

Thank You, TSS is almost 2 months out with shipping items ordered.

 

[MEP001]

Have you tried local sign shops? There are lots here now, and they're usually a lot faster and more affordable than TSS.

 

[OurTown]

Try Premier Dryers. Thier sign lead times are much shorter.

 

[New Washdog]

Have you tried local sign shops? There are lots here now, and they're usually a lot faster and more affordable than TSS.

Go local, supporting your community is always good.

 

[Back4More]

We are distributors for Premier, TSS, and Ahern Signs. I know you are working with my brother in law Bob Keane. We can help with whatever you are looking for.

Sincerely,
Ron Campagna

 

[Tim.peele]

We are distributors for Premier, TSS, and Ahern Signs. I know you are working with my brother in law Bob Keane. We can help with whatever you are looking for.

Sincerely,
Ron Campagna

 

[Tim.peele]

Ron you mentioned you were a distributor for Premier I have their handheld dryers in all my self-service bays just had a customer who said it blow out of holder and hit their car apparently customers do not read instructions.is there a different holder made for their nozzles or is it possible to put a five second delay to give a customer time to have nozzle in hand before it cuts on they are a great addition and used regularly

 

[Eric H]

.is there a different holder made for their nozzles or is it possible to put a five second delay to give a customer time to have nozzle in hand before it cuts on they are a great addition and used regularly

Which nozzle and holder do you currently have?
Regarding the delay relay, Yes you can add a 24vac delay timer to the control wire that activates the contactor for the blower motors. I buy them from the local plumbing supply house in the HVAC section.

 

[Tim.peele]

Premier has nozzles that are shaped like a vacuum nozzle which is the wide angle style and holder is I would say triangle wide at top narrow where the end of the nozzle would rest. Would a square or rectangle Nozzle holder. That’s completely open on the bottom be better

 

[ShinePro]

Ron you mentioned you were a distributor for Premier I have their handheld dryers in all my self-service bays just had a customer who said it blow out of holder and hit their car apparently customers do not read instructions.is there a different holder made for their nozzles or is it possible to put a five second delay to give a customer time to have nozzle in hand before it cuts on they are a great addition and used regularly

 

[Eric H]

I’d switch to the Air-Logic nozzle and holder.

 

[ShinePro]

Hmmm
10 yrs - 4 different nozzles
Air logic- Diskin - someother blue thing like the now Mosmatic- and now Premier

my Customers are finally happy with Premier flat guns!
FWIW

 

[Tim.peele]

Hmmm
10 yrs - 4 different nozzles
Air logic- Diskin - someother blue thing like the now Mosmatic- and now Premier

my Customers are finally happy with Premier flat guns!
FWIW

 

[Tim.peele]

I thought about doing that Shinepro will customers actually put the bungee cords back on when they get done do you have a many that get stolen