What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Bay panels for IBA

soonermajic

Well-known member
Tunnel friend of mine has too many bay panels. They're 14' x 16"! My IBA is 12' tall x 40'long.
Would those need too much adjusting on them? Can you saw off the top 2', or is that too difficult, &/or gonna look bad?
I'm thinking i don't really care what it looks like up near the roof...? But I have zero experience with these. He's willing to sell for half price, but I don't want them at all, if they won't work.

FYI: My Razor & SoftGloss are both already installed & working. Not sure if that changes things...?
 
Last edited:
You can cut them to size. We use a grinder with a thin metal cutting blade. To save money, use a j trim on top and bottom if he has some of those left over as well.
 
i use a battery powered saw with a paneling bade to cut extrutech. Not much use for short cutoff sections except a few over the bay openings.
 
Turns put they were 14 feet byb16 inches. I figured as much, but he had said 14 feet by 16',& i erroneously thought it was 16feet. 😰
 
Back
Top