Baymaster bay boxes with Ryko SS

[Del Mastro]

I was wondering if anyone uses the Baymaster bay boxes from Exacta. I have Exacta equipment for my touchfree and would like to tie my SS bays in with it so I can offer wash codes, wash cards and credit card acceptance. I have looked at both the full Baymaster boxes and the retro boxes, but I have no idea what sort of job it will be to mate them up with a Ryko Signature series SS. (Current bay boxes have the keypad entry rather than a dial selector)

Any advice, critique, or pile of wiring schematics would be appreciated

 

[soapy]

All you should have to do with the ryko signature series bay box is energize the key pad to make it work. WHen the current timer is activated it energizes the key pad so the functions work during countdown. Credit cards, wash cards, etc just need a couple of wires to the key pad. I have added wash gear CC and wash card classic to my signature series with no problem.

 

[Car_Wash_Guy]

All you should have to do with the ryko signature series bay box is energize the key pad to make it work. WHen the current timer is activated it energizes the key pad so the functions work during countdown. Credit cards, wash cards, etc just need a couple of wires to the key pad. I have added wash gear CC and wash card classic to my signature series with no problem.

Do you have dual or single sided readers on your WashCard setup?

 

[soapy]

I have the dual readers with a display in separate box mounted along side the bay box.