best water resistant glue/contact cement for air shammee

[RAAOO7]

what is the best glue/contact cement i can use so my air logic nozzle that threads onto a vacuum hose doesnt come loose in a bay? I've tried everything and after a few days it gets loose and sometimes falls off the vacuum hose. Any suggestions?

 

[Mchas]

I just use super glue

 

[Kimberly Berg]

I've tried glue (JB Weld, plastic formula) but then it made it difficult to replace the nozzle down the road. Now I use a 3" long, narrow machine screw (10-24 with a cap nut). Drill through the cuff & hose. Insert screw & tighten cap nut. You can also use a little Loc-Tite (removable style).

 

[Waxman]

I use stainless steel sheet metal screws to secure my nozzle to the hose. If you really want to glue it I found that the clear silicone bathroom tub and tile caulking works really well in the car wash environment.

 

[Greg Pack]

I've used goop or similar contact cement and it seems to hold up ok. I tape it on with painters tape until the cement dries, then remove it.