Boom vac layout

[lighthousecarwash]

I received my new JE Adams boom vac setup and wanted to see if anyone could share some experience with how to layout the spacing. How far apart do you locate the vacs, how far away from the curb, did you install bollards in front of each vac, how did you route the wiring into the vacs from the ground, etc. Just want to get everything laid out and ready when the concrete guys get here!

Thanks,
Lighthouse

 

[MudMoney]

Pictures would give members better idea of your site,just saying.

 

[HeyVern]

I could check the spacing on mine, I believe it was 12'. They required an 8' deep footing.

 

[soonermajic]

Why wpuld anyone want an 8 foot deep footing?

 

[lighthousecarwash]

I was thinking about 12' spacing and striping the parking lot to keep them lined up. Did anyone just do parking bumpers in front of them or have you had any issues with people running into them?

 

[HeyVern]

Why wpuld anyone want an 8 foot deep footing?

So they don't blow over in hundred mile an hour winds.

 

[HeyVern]

I was thinking about 12' spacing and striping the parking lot to keep them lined up. Did anyone just do parking bumpers in front of them or have you had any issues with people running into them?

Mine are 13' apart and 17" behind the curb.

 

[HeyVern]

Here's a pic of the layout