Carwash Well Update

[Waxman]

Town says all plumbing from city water needs to be completely separate from my new water well.

So I have to decide what to plumb in to the well.

The well is 600' deep. 4.5 gpm. Well capacity (w/static level figured) is 810 gallons.

I have a touchfree and 2 SS bays.

Touchfree main pump feed as well as cold supply to SS bay CAT pumps is a given for connection to well.

What about: softner? heated water (for soap wax etc)? Spot free Rinse? Weep?

I know best payback is touchfree connected to well, followed by SS pumps.

One idea is to plumb well to touchfree and SS/cold feed and put in T's near furnace (production water), R.O.. Right?

TIA/Waxman

 

[Washmee]

My well supplies the water for all my wash functions. 110 feet deep and produces 80gpm. I do have completely separate plumbing for all potable water uses. Your R/O needs soft water to function properly.

 

[car washing systems inc]

I would not put the weeps on the well if your power goes out you will freeze up.