What's new

Cat pump oil

Ric

Cantree Member
Joined
Aug 31, 2007
Messages
967
Reaction score
5
Points
18
Location
West Michigan
Can someone direct me to a previous discussion regarding alternatives to cat pump oil. I guess I'm not smart enough to figure how to use the search function here:confused:
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Cat oil is an ISO68 hydraulic oil.

I use a mix of three parts ND30 and one part transmission fluid.

The search function is very finicky. I type "cat pump oil site:www.autocareforum.com" into Google.
 

slash007

Well-known member
Joined
Jul 8, 2012
Messages
2,456
Reaction score
398
Points
83
Location
Lexington, Ky.
Not sure if this is right, but my distributor always told me to just use ND30 in my cat 623 pumps and that is all I have use for the past six years.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
I wouldn't use ND 30 on a pump still under warranty, but I've never seen a problem caused by it in any pump.
 

Erik_Catpumps

New member
Joined
Dec 18, 2013
Messages
6
Reaction score
0
Points
1
Location
MN
If not using Cat oil, we recommend a non-detergent 30W hydraulic oil.. equivalent to a ISO 68.
 

washnvac

Well-known member
Joined
Mar 30, 2008
Messages
1,051
Reaction score
168
Points
63
Location
Seaford, DE
Why would you just not use CAT oil?? I buy the 2.5 gallon jugs from KR, and keep one at each location. I order it when they have a free ship special. It costs only $3.50 per change on the 5cp2120, $4.60 on the 310. I change every 7-10 months. Seems like a waste of time, just to try a save few cents on this item.
 

2Biz

Thread Killer!
Joined
Nov 22, 2010
Messages
2,818
Reaction score
431
Points
83
Location
Ohio
Along the same lines as the topic, does anybody know how many gallons of water you can run through one of these pumps before needing the oil changed? Some washes are much busier than others and it doesn't make sense to change oil on regular intervals. To me, it makes way more sense to change based on usage....

BTW..I use Cat Oil in the 2.5 gallon jugs....
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
You would go by hours of use, I believe 500 is the recommended time.
 

Kevin James

Active member
Joined
Nov 15, 2007
Messages
562
Reaction score
32
Points
28
Why change the oil if it’s not contaminated with water? We’ve got 1 pump out of 23 that has MILKY blue oil in it, I told the guys to run it like that until it comes apart, so far it’s been over 3 years. Pressure is still up around 1500 psi and it’s not making any noise.
 

2Biz

Thread Killer!
Joined
Nov 22, 2010
Messages
2,818
Reaction score
431
Points
83
Location
Ohio
You would go by hours of use, I believe 500 is the recommended time.
Thanks....Since I don't have hour meters, this equates to roughly 90K gallons per pump. Factoring in LP systems, Softener, and SFR., this will give me a baseline to go by...
 

dogwasher

Member
Joined
Sep 8, 2007
Messages
398
Reaction score
0
Points
16
Chevron GST ISO 100 is what you want or different brand with the same properties. 2 years ago it was about $80 for five gallons...now how does that compare to your cat oil$$!
 

Erik_Catpumps

New member
Joined
Dec 18, 2013
Messages
6
Reaction score
0
Points
1
Location
MN
Not familiar with Chevron GST ISO 100. But Cat oil is a multi grade ISO 68.
 
Etowah
Top