What's new

Chemical backflow possibility through Hydrominder

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
repair parts aren’t too expensive.
That's why I replaced mine instead of rebuilding it, the three kits for a complete overhaul were almost $800.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,858
Reaction score
2,208
Points
113
The last I rebuilt my Zurn Wilkins 975 RPV the kit cost me around $40.00
 

Rodebaugh1

New member
Joined
Jul 31, 2021
Messages
22
Reaction score
12
Points
3
I guess I must be lucky
It's good to be lucky! The city sends me reminders about a month in advance of the due date every year for my car wash and laundromat. Inspections run about $150 each every time. If there is a problem, the guy that inspects them is also certified to repair them through his sideline business. According to our city's code, if I make even a small repair (like changing out a 1/4" ball valve that was dripping), I'm supposed to let them know so they can come out and inspect it again for ~$150. The only way our hydrominder would meet air gap requirements would be if it withstood an airplane crash that also broke the city water line. They went so far as to tell me that if I own a garden hose that can be laid on the ground, there is a possibility for cross contamination. Basically, every business in our town is required to have back flow prevention. Residential is also required to have backflow prevention if they have any kind of sprinkler system. However, the majority of people and businesses in our town are also lucky - as they have never been inspected and if they have, it's been years.
 
Etowah
Top