Connecting Hamilton to Ryko SoftTouch. Need Help

[petitemoose]

I've got the wiring diagram from the Ryko specifying where the wires originate from and Hamilton tells me that I am to terminate on wash packages on A1,2 3,4,5,6, B1 and 2 then C5,6 for the Wash in use signal. Ryko terminal numbers are G 90,99 ( Ground Neutral and Hot ) 4, 19,21,23,25,35,92. I am assuming 19,21,23 & 25 will be the wash package Hots. My question is: is 4 the common for the A2,4,6 and B2 with 35 and 93 being the Wash in use signal? I hate to guess incorrectly and "release Magical Smoke"

 

[petitemoose]

Got It!

Nevermind I called Ryko and they answered the questions I had in a very friendly way. FYI it is called a Ryko Soft Gloss XS machine and the assumptions I made were incorrect! If anyone is interested I can post the correct way to wire it, otherwise ignore / delete the thread since there is nothing useful contained within it.

 

[pitzerwm]

go ahead and post the right way, you never know, tomorrow someone else may need it.

 

[mac]

Hello Petite Moose. Are you Dennis? If so do I still need to come there?

 

[Rfl6543]

Ryko SGXS

Hey petite moose,
If you need help on Ryko's , please let me know. you did work for my former company in tampa area on a tunnel with a hydraulic leak. Take care