Jason Studer
Member
- Joined
- Jan 18, 2008
- Messages
- 87
- Reaction score
- 4
- Points
- 8
Credit card acceptors
- Thread starter Jason Studer
- Start date
Jeff_L
Well-known member
Here are 3.
Wash Gear
Wash Card
Cryptopay
It's a religion on this forum which one to go with. From posts, it's typical to be paying around 5% of revenue to a cc processor for their service. That seems to hold true for me as well.
Wash Gear
Wash Card
Cryptopay
It's a religion on this forum which one to go with. From posts, it's typical to be paying around 5% of revenue to a cc processor for their service. That seems to hold true for me as well.
I love this! You hit it right on the head with this!
Earl Weiss
Well-known member
- Joined
- Aug 31, 2007
- Messages
- 6,372
- Reaction score
- 943
- Points
- 113
Don't know if it's a religion.
Crypto seemed to be the Cheapest and simplest install available.
Waxman
Super Moderator
crypto pay is easy and good. customers like it. count up the money spent on display; best way i.m.o.
cc fees are 5-6%. just a cost we must absorb. price services accordingly. i am $3 /4min startup
cc fees are 5-6%. just a cost we must absorb. price services accordingly. i am $3 /4min startup
A lot of operators up here in the Pacific Northwest are installing USA Technologies https://www.usatech.com/products-services/eport-connect E-port card readers on the front of their Bill Changers instead of putting a card reader in every bay. They seem to be working out well. One guy I know put one on his Bill Changer that dispenses Quarters.
Jason Studer
Member
- Joined
- Jan 18, 2008
- Messages
- 87
- Reaction score
- 4
- Points
- 8
I would have loved top start out with a credit card acceptor on my change machine,but my Rowe BC1400 is not compatible.
Has any one been charging the customer for the C.C. fee. Here in Minnesota we can now forward that charge to the customer. Not sure how that would go over with the customer. 5% of $5-$6 is not much, 5% of $5000 can add up every month.
Has any one been charging the customer for the C.C. fee. Here in Minnesota we can now forward that charge to the customer. Not sure how that would go over with the customer. 5% of $5-$6 is not much, 5% of $5000 can add up every month.
mjwalsh
6 bay SS w/laundromat
Randy,
That is an interesting development! If Jason is a token operator ... it could possibly be an even better fit. Based on my positive experience & many laundromat owners ... if we could get some serious lobbying from larger Metro areas (with the ATM manufacturers & distributors) so they would more commonly include a hopper instead of just having the ability to dispense just more than one bill denomination ... ATM seems to be a better option. It has been over 4 years since we put in our ATM to satisfy the "no cash carry people" ... we honestly do not see where our ATM has been one speck more of a security risk than having bill changers. I may be wrong but I doubt that as long as the tokens from the hopper is clearly labeled as only an option & they could still get bills if they chose ... that there would be a problem legally.
mike
Last edited:
Jason, what kind of validator are you using in your Rowe BC1400 changer?
PaulLovesJamie
rural 5 bay SS
I've been thinking about it, but dont like what I'm seeing about the regulations - I posted my questions separately to avoid hijacking this thread:
http://www.autocareforum.com/showthread.php?13081-credit-card-convenience-fee-surcharge&p=97692#post97692
Interesting. So basically he is losing money every single time someone uses a credit card at his facility. He's just swapping money for money and eating the processing fee... Or he is agreeing to pay them to use his facility
Anywho, do you know if this is possible with American Changer?pgrzes
Active member
I just put a Cryptopay swiper on my American Changer that dispenses $1 tokens. I have 110v mag50's. Right now I have a separate 24v power supply for the swiper and used a relay to cycle the pulses. I had to have Tom at Cryptopay change the pulse output. I have a swiper without the button and set it up for a $5 charge only. Just finished yesterday, I allready see that I will be trying to hone this in for a better setup. I can see I need to find 24v inside the cabinet that shuts the swiper down when something goes wrong with changer.Interesting. So basically he is losing money every single time someone uses a credit card at his facility. He's just swapping money for money and eating the processing fee... Or he is agreeing to pay them to use his facility
I thought it was rather odd that he would do it that way but said that he’s OK with it. So I guess it’s OK, what ever makes him happy. He told me the last time I talked to him that he was doing around 60% credit card sales and business overall was up, even with the fee's. Yes you can put a USA Technologies card reader on an American changer.Interesting. So basically he is losing money every single time someone uses a credit card at his facility. He's just swapping money for money and eating the processing fee... Or he is agreeing to pay them to use his facility
Pete, if you want the reader to turn off when the changer goes out of service you need to put a relay on the out of service light. When the light comes on the relay should turn off the power to the credit card reader. Be careful, some Bill changers the out of service light is hot all the time, the controller closes the common to turn on the out of service light.
L
loewem
Guest
With Randy's help I did what Randy is describing using a USATech e-port. Pretty easy and inexpensive for the equipment and the fees are about 5%. The equipment cost about $400 and a 24 volt transformer for $20. I like to keep things simple, so one place to get tokens for credit cards rather than card readers on everything is better for me. They have nice reporting via the usatech site.
Jason Studer
Member
- Joined
- Jan 18, 2008
- Messages
- 87
- Reaction score
- 4
- Points
- 8
I use the Rowe Bill validator BC50
