I can't seem to locate information on the meaning of the different light on the coordinator.Does anyone have the link to it? A is flashing and for some reason I don't remember it being on before. Had a power surge or lightning that cause my building alarm to go off and that's when I noticed the light flashing.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Cryptopay coordinator
- Thread starter ronswash
- Start date
DiamondWash
Well-known member
The “A” light indicates a transaction is ‘in’ the coordinator waiting to be finalized. They pre-auth a card, then wait two hours for the customer to use the card at various devices in order to consolidate the swipes into a single transaction. This saves you processing fees.
Single flash of the “A” light for one transaction, two blips for two, etc..
The “B” light flashes when the coordinator is connected to the payment server. (this is a short time so you usually will not see this).
The “C” light flashes when the coordinator is being updated with new firmware. (this is usually done at night).
Single flash of the “A” light for one transaction, two blips for two, etc..
The “B” light flashes when the coordinator is connected to the payment server. (this is a short time so you usually will not see this).
The “C” light flashes when the coordinator is being updated with new firmware. (this is usually done at night).
