M madstack Member Joined Feb 26, 2008 Messages 103 Reaction score 3 Points 18 Location newton nj Jun 7, 2014 #1 Has anyone experienced this before? We front wheel pull from the driver's side so the other side just roll over raised slick plates.
Has anyone experienced this before? We front wheel pull from the driver's side so the other side just roll over raised slick plates.
E Earl Weiss Well-known member Joined Aug 31, 2007 Messages 6,372 Reaction score 943 Points 113 Jun 7, 2014 #2 Not likely it happened at the wash. Possible causes. Under carriage got moved somehow. Something fell off another vehicle and got lodged under this one. If it was caused by the wash it would (sadly) hapen a bunch of times.
Not likely it happened at the wash. Possible causes. Under carriage got moved somehow. Something fell off another vehicle and got lodged under this one. If it was caused by the wash it would (sadly) hapen a bunch of times.
J JGinther Zip-tie engineer Joined May 31, 2008 Messages 743 Reaction score 170 Points 43 Location Loveland, CO Jun 8, 2014 #3 I'm assuming the tire blew...? I bet the vehicle suffered damage previously, and the sidewall stress from the conveyor and or correlator transition was the final straw....
I'm assuming the tire blew...? I bet the vehicle suffered damage previously, and the sidewall stress from the conveyor and or correlator transition was the final straw....
J JeffM The Canadian Joined Nov 19, 2011 Messages 141 Reaction score 0 Points 16 Location Winnipeg, MB Jun 9, 2014 #4 I've seen outside passenger side, and in and outside drivers side, but never passenger inside. Any pictures?
I've seen outside passenger side, and in and outside drivers side, but never passenger inside. Any pictures?
