Earl Weiss
Well-known member
Here are 4 Videos of The Foamers. Originaly with my Home Made Sticks I was at 360 / 1 with KR Triple Foam, Flo Jets at 25 PSI and Air at 15psi.
I use Ultra lean tips and Hydrominders. Pink =360, Purple 470. green 600. From the foamer Use 1/2" Braided to the arch and T to 3/8" poly to the foamers.
Initialy I put Low PH KR Pre Soak 360 / 1 with Air Assist thru .03 Nozzles on the car to help foam run out of rain Channels.
Installed the Mr. Foamer and reduced Flo Jet to 15 PSI. Had rinsing issues and went to 470 / 1 which is videos C &D, Increased Flo Jet to 20PSI.
Still had some foam blow out of Channels and Videos E& F are at 600 / 1.
[video=youtube;9lY1XbaDwuY]https://www.youtube.com/watch?v=9lY1XbaDwuY[/video]
https://www.youtube.com/watch?v=53jfju6W8LA
https://www.youtube.com/watch?v=le8ldby8q2g
https://www.youtube.com/watch?v=D7mCYdIuCds
I use Ultra lean tips and Hydrominders. Pink =360, Purple 470. green 600. From the foamer Use 1/2" Braided to the arch and T to 3/8" poly to the foamers.
Initialy I put Low PH KR Pre Soak 360 / 1 with Air Assist thru .03 Nozzles on the car to help foam run out of rain Channels.
Installed the Mr. Foamer and reduced Flo Jet to 15 PSI. Had rinsing issues and went to 470 / 1 which is videos C &D, Increased Flo Jet to 20PSI.
Still had some foam blow out of Channels and Videos E& F are at 600 / 1.
[video=youtube;9lY1XbaDwuY]https://www.youtube.com/watch?v=9lY1XbaDwuY[/video]
https://www.youtube.com/watch?v=53jfju6W8LA
https://www.youtube.com/watch?v=le8ldby8q2g
https://www.youtube.com/watch?v=D7mCYdIuCds
