Does coleman have any tech support?

[geterdone]

Does Jim Coleman have tech support?

 

[Rfreeman]

What's your issue a few of us on here have coleman equipment.

I have 4 sites all coleman equipment in the Equip Rooms

 

[geterdone]

The error massage prox#2 loose and/or needs to be replaced. Then this morning it said prox #1 and #2 are wired wrong need to swop connection's. I replaced the prox and the cord #2 on Saturday.

 

[Greg Pack]

That error can be a little more challenging to solve . I don’t know how it knows the difference but the cables have to be on the correct proximity switch. If you don’t have both proximity switches properly spaced between the moving targets you can get multiple error codes . Too close and they don’t get the “off” they need. Too far and they don’t get the “on” long enough . If it’s an older machine you might want to replace both proximity cables. I buy replacement cables from automation direct and they’re only $25 each or so.

 

[geterdone]

Hey, thanks for the feed back. I replaced the wheel and it seems like it's working . The center of the wheel was very worn. I've washed bout 30 cars so far.......