kyros New member Joined Feb 16, 2016 Messages 24 Reaction score 1 Points 3 Location Cyprus Sep 3, 2018 #1 Hi i have a problem with my EW. the keybord and the program selections buttons does not work at all. any suggestions? thanks kyros
Hi i have a problem with my EW. the keybord and the program selections buttons does not work at all. any suggestions? thanks kyros
G Greg Pack Wash Weenie Joined Sep 3, 2007 Messages 4,380 Reaction score 2,159 Points 113 Location Hoover, Alabama Sep 3, 2018 #2 None here. Are you referring to the original entry wizard? Their aren't many left out there operating in the world. I have a EW 2.0 in my basement I'll sell for cheap if you have one of those and need parts.
None here. Are you referring to the original entry wizard? Their aren't many left out there operating in the world. I have a EW 2.0 in my basement I'll sell for cheap if you have one of those and need parts.
kyros New member Joined Feb 16, 2016 Messages 24 Reaction score 1 Points 3 Location Cyprus Sep 3, 2018 #3 yes its the original one EW2.0.this is the only problem i have the keybord and the program selection buttons
yes its the original one EW2.0.this is the only problem i have the keybord and the program selection buttons
G Greg Pack Wash Weenie Joined Sep 3, 2007 Messages 4,380 Reaction score 2,159 Points 113 Location Hoover, Alabama Sep 6, 2018 #4 any help from coleman on this issue?
kyros New member Joined Feb 16, 2016 Messages 24 Reaction score 1 Points 3 Location Cyprus Sep 6, 2018 #5 Not yet but today i solve the problem.there was a keybord socket unplac on the bottom of the board.i just found it by luck
Not yet but today i solve the problem.there was a keybord socket unplac on the bottom of the board.i just found it by luck
