Flojet Pump For 6 Bay

[GreatWash]

I am rebuilding my low pressure system with new solenoids and flojet pumps. Has anyone used 2 flowjet pumps to ensure enough volume for a 6 bay system? I have 2 IBA next to my equipment room with SS on both sides so the distance from the equipment room to the furthest bay is 4 bays in either direction. Thanks!

 

[cantbreak80]

I have several 6, 7, 8-bay customers operating with G57 pumps with no issues.

If you're concerned about volume, FloJet offers a dual G57 that can provide up to 10 GPM.

 

[Earl Weiss]

I use a single G57V pump for all LP functions on my 8 Bay except Foam Brush. For the FB I use a pump for 2 Banks of 4 Solenoids each. I assume all specs are exaggerated but the materials say 5 GPM max. With 8 .05 nozzles that is 4 gpm and the likelihood of all 8 using the same LP function at the same time is low.

 

[washnvac]

I have a 9 bay using one pump. Like Earl said, it is highly unlikely everyone is using the same function at the same time.

 

[tdlconceptsllc]

I got a busy 10 bay with a single on foam brush and double on presoak and have tried both and can't tell a difference