Foamier pre-soak & wheel cleaner?

[cantbreak80]

and...remind me, how large is the solenoid valve oriface?

 

[Earl Weiss]

and...remind me, how large is the solenoid valve oriface?

I am guessing;
A. Rhetorical question - You already know;and
B. 1/8"

 

[cleaning up mud]

I don't think you can ever get too much foam, if its not enough people don't think your using soap!

 

[Earl Weiss]

For those who asked. Tip is 2505.

Checked volume yesterday. Ran it into a bucket for 1 minute then let the faom settle down. it was 48oz.

 

[cantbreak80]

YIKES!

Using my cost and dilution ratio for tire cleaner...
that would cost almost 17.5c per minute!

I deliver thick-rich tire foam through a separate "foam gun"...
at 6 oz per minute it costs about 2c per minute.

 

[Earl Weiss]

IF KR is $90.00 / 5 Gal ($67.50 on Sale) at 90/1 makes 57600 oz. = .15625 cents per diluted oz x 48 =7.5 cents per minute.

 

[Ric]

IF KR is $90.00 / 5 Gal ($67.50 on Sale) at 90/1 makes 57600 oz. = .15625 cents per diluted oz x 48 =7.5 cents per minute.

Looks good. Does it clean well? Wheels/brake dust, etc.?

 

[Earl Weiss]

Looks good. Does it clean well? Wheels/brake dust, etc.?

Like most ss products I think the cleaning ability is relatively mild, as it needs to be. Once the wheels all have this applied and you blast them with the HP they are perfectly clean. The HP might accomplish this without the wheel cleaner. I really have no way of measuring if it would be mlore or less effective without most any product applied before hitting it with the HP.