C cleaning up mud Member Joined Dec 4, 2007 Messages 651 Reaction score 4 Points 18 Location Central Texas Jan 28, 2014 #1 When you run a wheel test the gantry passes the end of tract prox, and hits the stops and times out because the wheels have run too long, but when you run the gantry manually it stops at the end of tract flag. Any ideas.
When you run a wheel test the gantry passes the end of tract prox, and hits the stops and times out because the wheels have run too long, but when you run the gantry manually it stops at the end of tract flag. Any ideas.
T Tom Thumb Active member Joined Aug 30, 2007 Messages 506 Reaction score 40 Points 28 Location Orlando,Fl Jan 28, 2014 #2 Check adjustment on end of track proxy, if this does not work replace proxy.
R Reds Member Joined Sep 3, 2007 Messages 641 Reaction score 1 Points 16 Location Northeast Pa. Feb 1, 2014 #3 and if that doesn't work replace the cable