Some More Advice
I've spent a lot of time (several decades) investigating, testing, and working with ozone as applied to detailing... and have published information that should help in your choice of units and use of the machine in odor removal and sanitizing automobile interiors.
An ozone machine should be part of a detailer's arsenal
for interior cleaning, along with an extraction shampooer. Finding the source of the malodor is the first step, and it usually requires a clean-up. Hence, the extraction shampooer.
Choosing an ozone generator is best done by evaluating the amount (number of grams) of ozone generated because "more" is better than less. Reason: The kill efficacy is quicker, and time is money.
So is convenience. The units used to get odors out of hotel rooms take too long. Hunt for a powerful unit, and accept that there is cleaning required to keep the ozone unit effective. Whether it's transfer plates or UV tubes, once a film of dirt coats the surface, significantly less ozone is generated.
Once the odor-causing stuff is cleaned up and affected the area is dry, you're ready to sanitize the interior cabin. The engine should be running, and the air conditioner should be on at "max cold"... so the interior air is recirculated through the vents. This cleans he air ducts as well as circulates the ozone throughout the interior cabin. Remember that ozone is a gas that kills, so it must permeate the entire interior. Don't worry about anything oxidizing unless you intend to leave the ozone working for a real long time; like a week.
(continued)