Going from 8 options to 12 in SS bays

[Strava]

I'm looking at ordering new meter boxes and going from 8 to 12 options. I was wondering what I should add in the last two open spots

----what I have on my meter box now------

1. Stop
2. Tire Cleaner
3. Pre-Soak
4. Wash Soap
5. Foam Brush
6. Rinse
7. Clear Coat
8. Spot Free Rinse

-----what I plan on adding atm-----

9. Blower
10. Tri-Foam

-----what do I add for the last two spaces----

11. Rain-x???
12.??????

 

[washnshine]

You’ve got all the biggies. Maybe a bug/salt remover on the empty slot and instead of trifoam, put in a carnauba wax or ceramic sealer.

 

[MEP001]

I wouldn't try to fill them all with something. Add a second rinse before the spot free.

 

[tdlconceptsllc]

Low pressure wax from HP gun and wheel brush

 

[SuperSuds04]

Another response for low pressure wax. I added a carnuaba wax option back in March of this year and it's getting used steadily. It is a costly chemical but being count up it's more time spent in the bay and more revenue. I have 2 high pressure rinses as stated above and an engine cleaner option which I'll just be combining with my tire cleaner when I get my blowers put in this year. Mind if I ask what blower option you went with?

 

[Strava]

Mind if I ask what blower option you went with?

I have no clue. I'm owned my wash for about 2 months now and I'm still trying to educate myself. Have any suggestions? : )

 

[SuperSuds04]

I have no clue. I'm owned my wash for about 2 months now and I'm still trying to educate myself. Have any suggestions? : )

I'm still shopping around myself and getting pricing together but it seems like the single motor Air Shamme is the most popular from what I've seen if you don't go the DIY route. I have noticed I like the trigger pull guns with just a round opening much more than the sliced 10-12" option handles when I've used them at competitors seeing what I like/don't like

 

[UtahYoutubeGuy]

I am in the same spot as you right now. Ordering new boxes and thinking of the additional settings.

I too like the idea of RAIN X. I feel like its a good brand play and people will soak their vehicle in it.

Whats the update on the route you went.

Also like MEP's idea to do a second rinse cycle before spot free.

 

[Greg_T]

I know that this is a left-field option, but we have a setting for a fresh water flush to outboard motors. It is a separate hose line, with a fitting to clamp around the water inlet on outboards. Shown in the bottom left corner of this photo. From what I can gather, this seems to be pretty rare at other carwash sites.

 

[Nuphoenix]

I'm looking at ordering new meter boxes and going from 8 to 12 options. I was wondering what I should add in the last two open spots

----what I have on my meter box now------

1. Stop
2. Tire Cleaner
3. Pre-Soak
4. Wash Soap
5. Foam Brush
6. Rinse
7. Clear Coat
8. Spot Free Rinse

-----what I plan on adding atm-----

9. Blower
10. Tri-Foam

-----what do I add for the last two spaces----

11. Rain-x???
12.??????

I put in under undercarriage wash.

 

[SudsnShine115]

I'm looking at ordering new meter boxes and going from 8 to 12 options. I was wondering what I should add in the last two open spots

----what I have on my meter box now------

1. Stop
2. Tire Cleaner
3. Pre-Soak
4. Wash Soap
5. Foam Brush
6. Rinse
7. Clear Coat
8. Spot Free Rinse

-----what I plan on adding atm-----

9. Blower
10. Tri-Foam

-----what do I add for the last two spaces----

11. Rain-x???
12.??????

Save it for air dryers in the future.