What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

GPM in self serve

washnshine

Well-known member
I think most self serve operators are operating in the 1000 - 1200 psi range, but what are you guys at for gallons per minute in your self serve bays?
 
At 1,000 PSI:
#6 spray tip flows 3.0 GPM
#7 spray tip flows 3.5 GPM

At 1,200 PSI:
#6 spray tip flows 3.3 GPM
#7 spray tip flows 3.8 GPM
 
I think most self serve operators are operating in the 1000 - 1200 psi range, but what are you guys at for gallons per minute in your self serve bays?
We're restricted by the city to stay at 3 GPM or less. I run 25055 tips at 1200 PSI which puts me just a hair over that, but the last inspector didn't say anything.
 
We're restricted by the city to stay at 3 GPM or less. I run 25055 tips at 1200 PSI which puts me just a hair over that, but the last inspector didn't say anything.
You have an inspector that comes by to check water consumption at your self service bays? What's next, bandwidth police?
 
Water consumption, boiler inspections, backflow preventer inspections, fire extinguisher inspections, fireman access key box checks, the fire marshal can even have a car towed from private property if it's left in a fire lane.
 
Back
Top