What's new

Hamilton ACW makes new noise.

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,050
Reaction score
1,694
Points
113
Location
Orange, MA
My autocashier has a noisy fan/motor. Probably should fix berfore it gets so cold that my fingers go numb whilst screwdrivering gloveless.

Anybody got a tip for me?

TIA/wax
 

I.B. Washincars

Car Washer Emeritus
Joined
Aug 30, 2007
Messages
4,285
Reaction score
1,165
Points
113
Location
SW Indiana melon fields.
My ACW 4s and 5s haven't had fans for years. It's probably no big deal if it works or not. Maybe if it was facing the sun all day in Phoenix, but in MA I doubt if heat would ever be an issue.
 

Whale of a Wash

5 Washes 36Bays 2Vectors
Joined
Sep 10, 2007
Messages
1,072
Reaction score
3
Points
36
Location
Fargo,ND
I think a thermister controlled the fan, and only came on when really hot. My fan has been long gone, but the hamilton still uses the heat tape when really cold.
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,050
Reaction score
1,694
Points
113
Location
Orange, MA
Maybe there is a plug connector on the fan that I can simply disconnect?
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,050
Reaction score
1,694
Points
113
Location
Orange, MA
Found out I need the fan on my Goldline cashier. Randy Nix told me. Thanks, Randy!
 

Diana

Member
Joined
Sep 12, 2007
Messages
38
Reaction score
0
Points
6
My ACW fan was making a noise. Saturday, (when I took out the controller to solder in the new and wonderful display) I got from Randy, I found that the fan grill, was rubbing the fan blades making the noise. Note: The controller doesn't need to be removed to get to my fan. Just tossed that in for the opportunity brag about my new Dixmore Red display again! Picture link of what I call the fan grill below:

http://www.alphawareinfo.com/accessories/200X200/FAN-grill.jpg
 
Top