Menu
What's new
By:
Filters

Hamilton Changer Issue

M

mcarter1990

Member
Joined
Jun 13, 2022
Messages
82
Reaction score
17
Points
8
Hello again its me.....

Last night I notice my changer wasn't taking any dollars. Now it worked a week ago and had cash in it. But last night no cash.....or change. So I looked inside and noticed that the bill validator was flashing. I I took bill box and validator out and didn't notice anything wrong. The coin bucket is working, I can hit the feed switch and money is coming out. I turned the power off a couple times and still nothing?

This is a SS type.

Not sure what to look for or correct.

IMG_0863.jpg IMG_0214.jpg
 
R

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,913
Reaction score
2,301
Points
113
A little more information would be helpful. Is it dual validator/hopper changer? What model validators does it have installed? Did you have any quarters/tokens/coins in the Hopper or was it totally empty? You say you turned On the Hopper dump switch on the bottom of the Hopper and it worked, did you have to plug in the Hopper switch dump switch disconnect to run the Hopper? What was the flash code on the controller (that’s the Green LED) on the front of the controller?
 
M

mcarter1990

Member
Joined
Jun 13, 2022
Messages
82
Reaction score
17
Points
8
Randy said:
A little more information would be helpful. Is it dual validator/hopper changer? What model validators does it have installed? Did you have any quarters/tokens/coins in the Hopper or was it totally empty? You say you turned On the Hopper dump switch on the bottom of the Hopper and it worked, did you have to plug in the Hopper switch dump switch disconnect to run the Hopper? What was the flash code on the controller (that’s the Green LED) on the front of the controller?
Click to expand...
Sorry, Single hopper. The validator is a Hamilton I think. The validator is Stainless steel. The bill hopper is Stainless steel too. The coin hopper is full. I turn the toggle switch on and it was vending quarters, But not on bills. Dump switch? This might be the same as toggle switch. The flash code was red on the side of validator where the dip switch are. It looked like a L or a P.
 
M

mcarter1990

Member
Joined
Jun 13, 2022
Messages
82
Reaction score
17
Points
8
So I got it fixed today!! There is a red reset button on the top and I pushed it and things are working again. Thank you for everyone's help!
 
You must log in or register to reply here.
Top