What's new

Hamilton Goldline error

Jimmy Buffett

Active member
Joined
Sep 4, 2007
Messages
1,022
Reaction score
0
Points
36
I have gotten the "unexpected coin drop" twice in 2 days now. I can't see anything wrong and it will clear and work fine after acknowledging the error. Any suggestions as to what I should be looking for? It's a sunny Saturday and I expect long lines.
Thanks,
Jim
 

Jim L.

Florida panhandle
Joined
Aug 30, 2007
Messages
296
Reaction score
1
Points
16
Location
Navarre, Fl.
I’ve had this same problem with my Hamilton ACW a couple of times. It was always in the hopper. Once was a bad coin switch and the other was a bad motor. The first time I replaced the hopper with a plastic cup while I sent it in for repair. The second time I bought a replacement hopper. Now I have a spare.

Jim @ Etowah Valley did the repairs.
 

Jimmy Buffett

Active member
Joined
Sep 4, 2007
Messages
1,022
Reaction score
0
Points
36
Any ideas to diagnosing the problem? I don't guess the machine logs any info that might be helpful. It was out of service when dad got to the wash today. Probably cost me $100 in lost business.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,860
Reaction score
2,211
Points
113
Jim,
You?ve got a problem with the payout switch in the Hopper. I?ve done a lot of these. It?s not too difficult to replace the switch. If it was a Hopper Coasting error it would say it on the door. Normally when you get a Hopper coasting error it?s the brake on the back of the motor that is out of adjustment or broken. I?ve got spare Hoppers if you need one.
 

lag

Member
Joined
Sep 5, 2007
Messages
434
Reaction score
2
Points
18
Location
Middle of Iowa
Any ideas to diagnosing the problem? I don't guess the machine logs any info that might be helpful. It was out of service when dad got to the wash today. Probably cost me $100 in lost business.
I would agree that it is a motor coasting ,on the hopper, you need to service it soon.

Mabe i missed something ,but if you are talking about a changer it will go to out of service, but if you are talking about the goldline auto cashier, should it not go to exact change only ,instead of shutting down?
 

Jimmy Buffett

Active member
Joined
Sep 4, 2007
Messages
1,022
Reaction score
0
Points
36
I don't know, you would think exact change instead of shutting down. They guy just came by. It happened about 3 this morning. He put in a 10, it gave him change but no wash then shut down. There has been a line in front of it all day so I have not been able to get into it. Guess I'll be here late tonight. Who needs a life anyway!
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
A quick, temporary fix would be to swap the leads on the payout switch. If you do, remember that there are two switches sandwiched together, and you must switch the pairs of wires together and plug them back in on the same positions they were before. Your hopper counter won't work right, but the hopper itself should. While you're in there, check under the switch for dirt buildup.
 

Jimmy Buffett

Active member
Joined
Sep 4, 2007
Messages
1,022
Reaction score
0
Points
36
Maybe I will understand more what you are talking about once I get a chance to get into it. I have never had to look at the hopper before. I need to get a spare I guess.
 
Etowah

Jimmy Buffett

Active member
Joined
Sep 4, 2007
Messages
1,022
Reaction score
0
Points
36
I cleaned that switch where the quarters drop into the slot last night as Randy suggested . There was a little stuff around it. So far so good, but we haven't done a lot of business since then. The wind is blowing about 30 mph today. More undisputed proof of global climate change.
BTW I really like the little spell check thing. I think it makes me look a little less like a moron.
 

bmg

New member
Joined
Jul 6, 2018
Messages
4
Reaction score
0
Points
1
Location
MA
Hi, I have a Hamilton hopper from a 2009 model. Have to check model if you still need it. Thanks BMG
 
Top