Help with identifying Vacuum Door

[designflaw]

Hey Guys, I need help with identifying this door. I need to replace it but am not sure where to get this from. Thank you!

 

[MEP001]

Hard to tell without seeing the whole vacuum, but it looks like a Doyle with a 3" coin mech. You won't find a new one, but it's just a piece of stainless steel with a double-D knockout for a lock and holes/slots for a coin acceptor. I wish I had a water jet or laser cutter, I could knock out stuff like that in no time.

 

[Carwashking]

I had some and Kleenrite has a replacement to switch to a coinmech acceptor. Don’t know part number because it was about 5 years ago I changed all in mine

 

[MEP001]

That is a coin mech acceptor, it's a 3" instead of the common 2". Whether he finds a new replacement door or makes or has made something, it would make sense to go with the more common acceptor.

 

[Carwashking]

The kleen rite door was so I could change to a 2”

 

[ACTcarwashlover]

That is a coin mech acceptor, it's a 3" instead of the common 2". Whether he finds a new replacement door or makes or has made something, it would make sense to go with the more common acceptor.

What’s the difference between a 2 inch or 3 inch coin acceptor in and are they both considered long drop or is one considered short drop?

 

[designflaw]

Here is the coin accepter that I am able to use with this. I have to take the face plate off, https://www.kleen-ritecorp.com/p-14...n-acceptor-faceplate-25-american-quarter.aspx

 

[MEP001]

What’s the difference between a 2 inch or 3 inch coin acceptor in and are they both considered long drop or is one considered short drop?

The difference between them is a width of 1". There are long drop and short drop in both 2" and 3".

 

[Randy]

Hey Guys, I need help with identifying this door. I need to replace it but am not sure where to get this from. Thank you!

What are the dimensions of this mystery vac door? I think I might have one.

 

[designflaw]

What are the dimensions of this mystery vac door? I think I might have one.

It looks like 10.75 inches x 6 inches. Here are some closeups that show the door and how they look like.

 

[designflaw]

Looks like Doyle (https://doylevacuum.com/) has these. I ordered a couple to get my new vacuum going.