Help with Replacement

[OASIS WASH]

I need to replace this KIP solenoid block. How do I know if its metering or less metering, and what does that even mean?

 

[OurTown]

It means it has an adjustment screw for throttling back the output for fine tuning.

 

[OASIS WASH]

Oh gotcha...can you tell if that is one? Where would the adjustment screws be located?

THanks.

 

[OurTown]

Somewhere there should be a small set screw for each output but I can't tell from the photo.

 

[OurTown]

They may be on the other side.

 

[Car_Wash_Guy]

I just replaced one on my dog wash. There should be a small metering screw either on the right or left hand side right adjacent to the in/out

 

[MEP001]

You can't see the adjustments in either your image or the one I linked. They're on the opposite side of the "OUT" port, just a screw head sticking out.

 

[Earl Weiss]

Metering is to adjust the output. Some on the forum use this feature. I do not. I regulate output by the air pressure of the pump feeding the block.