I had a DB ordered back in February. We were told that it would fit on the phone by Wash World while my distributor was on the phone with measuring tape in hand. The machine shipped and now does not fit in the bay. Spoke to Wash World the only solution they offered was to switch the arch to a razor. So now I have a double barrel carriage and a razor arch. Signage and pay station was ordered with DB logo etc. Any advice??? I am so burnt...... Do I climb some ladders in WW? Get an attorney? Losing time and business as I sit in dead water..
HELP!!! WW Razor Double Barrel
- Thread starter Sudsitup
- Start date
edcrawfordlv
New member
- Joined
- Jul 21, 2022
- Messages
- 15
- Reaction score
- 14
- Points
- 3
Why does the Machine not fit? Was it bigger than advertised or were your measurements wrong?
Waxman
Super Moderator
switch the arch and get the machine operationl so you can wash cars.
customers don't care if it's dbl barrel or not, they just want a clean car.
changing decals on signs in no big hot dog. your main goal should be to get the bay open so you can start making $$$$$!
customers don't care if it's dbl barrel or not, they just want a clean car.
changing decals on signs in no big hot dog. your main goal should be to get the bay open so you can start making $$$$$!
DiamondWash
Well-known member
I take it the bay isn't tall enough to fit the DB Razor, switching the arch to a regular arch is going to make for some really interesting new problems especially for how the carriage was redesigned to accommodate that new style arch and how the LP and HP are no longer utilizing one line anymore.
KYwashywash
Member
- Joined
- Jan 27, 2022
- Messages
- 30
- Reaction score
- 8
- Points
- 8
I have a new razor fully loaded shipping end of October. I’ll gladly flip it to you if want to trade even money?
PM if interested.
Is it Razor Edge?
KYwashywash
Member
- Joined
- Jan 27, 2022
- Messages
- 30
- Reaction score
- 8
- Points
- 8
PM you specs.
PEI
Active member
You could have the bottom 4 inches of the lower arches and lower arch cover cutoff so that it will fit. It should only remove 1 nozzle from each of the two arches
