What's new

How many guys do NOT use air on PS or TC/EC?

Etowah

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
Our air manifold went out on TC, so we just bypassed it for time being. ZERO customers have complained or noticed.
So, how many guys don't have air for PS, or TC? What's the pros / cons for having/not having air?
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,859
Reaction score
2,211
Points
113
We don't use air on our Presoak. I run the Presoak at 140 - 150psi. My air compressor will only put out about 115psi. So the air doesn't do much. No one has ever said a word about it not foaming. It's only been that way 20 years or so.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
How does a manifold go out?

You'll use a lot more tire cleaner without air to foam it, or you'll have to make it weaker.
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
I guess it was the solenoids on the 4 block manifold....
 

Rfreeman

Well-known member
Joined
Aug 4, 2014
Messages
761
Reaction score
439
Points
63
Location
Ft. Worth
Do you have a filter on your compressor? Typically (or at least it happened to me) water that forms inside the air compressor will travel with the air through your lines to the solenoids and rust them out. Installing a filter to trap this moisture and regularly discharging the condensate from the compressor helps with this.
 

PaulLovesJamie

rural 5 bay SS
Joined
Aug 30, 2007
Messages
1,320
Reaction score
229
Points
63
Location
Kutztown PA
I DO use air with the low pressure functions. I find that with air injected:
a) I use less product
b) I get better coverage on the car
c) the product tends to "cling" better on the car, less run-off - and therefore IMO cleaner cars.

On the occasions that the low pressure air injection was not working properly or turned off, customers did not notice (afaik) or comment. But I turned it back on anyway, for the aforementioned reasons.

I do have difficulty keeping things adjusted perfectly so that I get a "foam" spraying out for the low pressure, I think it's mostly the chems I use. I get more of a very bubbly / slight foam. But I'm not certain I really want/need to be spraying foam anyway. Tire cleaner, yeah, maybe.
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,372
Reaction score
943
Points
113
"Foaming" action is all about the show. Comments or lack thereof aren't always a great judge of perception. Quick story (Tunnel story) Some years ago I had an "A HA " moment. Customer says "I did not get any Soap on my car" My Reply "Is the car Clean? " Response "What difference does that make?"
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
"Foaming" action is all about the show. Comments or lack thereof aren't always a great judge of perception. Quick story (Tunnel story) Some years ago I had an "A HA " moment. Customer says "I did not get any Soap on my car" My Reply "Is the car Clean? " Response "What difference does that make?"
BRILLIANT
That is a great response
 

mac

Well-known member
Joined
Sep 3, 2007
Messages
3,558
Reaction score
791
Points
113
Yes it really is about the show and the other reasons Paullovesjamie mentioned. If you use a scented presoak it greatly enhances things with the perfume.
 
Top