How to wire nayax vpos to hamilton DTI system

[kingswaycarwashyeg]

Hey guys,

I hope someone can help me connecting all the wires from Nayax to my SS bay machine which is DTI from Hamilton used ID tech mag stripe.
I have Nayax powered up but my functions are not working when Nayax is running.

I can tell I miss wired somewhere where pulse 1 wire go. I have 5v relay that Nayax recommended to buy and connect.

Please help me if anyone knows or have experience with this set up.

 

[Fatboy769]

Are you wanting to do count up with the Nayax unit? Post some pics of your 5V relay and how you have it wired.

 

[kingswaycarwashyeg]

Are you wanting to do count up with the Nayax unit? Post some pics of your 5V relay and how you have it wired.

Yes, count up with Nayax.
Can you open the pdf here? Nayax sent me to connect it as pdf, but I think I miss wired on where credit line goes and common on left side
I got coin switch and ground on the left side and pulse 1, ground and VCC wired on the right side in order.

Should I pull 5V DC and common line connected to ID tech and connect them to left side?