I love new stuff!

[Martins]

Or at least making old look good! Finally gave my old changer a new facelift! And now it matches my new one.. kinda haha

 

[washnshine]

Or at least making old look good! Finally gave my old changer a new facelift! And now it matches my new one.. kinda haha

View attachment 7889 View attachment 7891 View attachment 7892

Awesome upgrade!

 

[Roz]

Looks nice, did you purchase directly from Hamilton? I have the same situation, same changer at one location.

 

[Martins]

Looks nice, did you purchase directly from Hamilton? I have the same situation, same changer at one location.

yes, i actually sent a picture of the changer to Hamilton and they were able to send me the faceplate p/n and i ordered it from kleenrite. it was $20 cheaper then ordering from Hamilton. i added the weather cover and bill numbers seperate to match.

 

[Roz]

Can I trouble you for those part numbers. No joy search KR site. Thx.

 

[Martins]

Can I trouble you for those part numbers. No joy search KR site. Thx.

no problem!

HCP63035201- lexon
HCP600318A -weather plate
HCP602216 -faceplate
HCP962083 - whitenumber pack (comes with blue)

 

[Randy]

That looks a heck of a lot better than the old black face panels, you did good.
I was at a car wash not too long ago waiting for the owner so I could fix his changer. The front of the DRS changer had a black face panel that was broken, duct taped, looked really bad, kind of like Martins picture of the black RNS face panel. While I was standing there a customer came up and looked at the front of the changer and said “It doesn’t look like this machine works I’m going somewhere else” and he walked off. This goes to show you what the public perception is, if it’s clean and shiny they’ll try it, if it looks like crap they’ll probably take a walk. I told the owner that he need a new face panel and what it was going to cost and said it was too expensive.

The only thing you left out was the Out of service lamp HCP470080 and Tinnerman speed nut HCP470080A. The HCP962083B is the blue denomination label kit.
I've sold a lot of those face panels over the years fo both ACW's and bill changers, looks are everything for the customer.

 

[traveler17]

no problem!

HCP63035201- lexon
HCP600318A -weather plate
HCP602216 -faceplate
HCP962083 - whitenumber pack (comes with blue)

Thank you for that !! Going to do the same !!

 

[Roz]

That looks a heck of a lot better than the old black face panels, you did good.
I was at a car wash not too long ago waiting for the owner so I could fix his changer. The front of the DRS changer had a black face panel that was broken, duct taped, looked really bad, kind of like Martins picture of the black RNS face panel. While I was standing there a customer came up and looked at the front of the changer and said “It doesn’t look like this machine works I’m going somewhere else” and he walked off. This goes to show you what the public perception is, if it’s clean and shiny they’ll try it, if it looks like crap they’ll probably take a walk. I told the owner that he need a new face panel and what it was going to cost and said it was too expensive.

The only thing you left out was the Out of service lamp HCP470080 and Tinnerman speed nut HCP470080A. The HCP962083B is the blue denomination label kit.
I've sold a lot of those face panels over the years fo both ACW's and bill changers, looks are everything for the customer.

You are spot on. We have three changers, two with new face plates since machine is a new DRS and one with an old faceplate. Old plate is in mint condition but looks dated. 90% of our change is made in the new DRS. Crazy thing I cannot figure out is how the change made is about 50/50 between the two separate changers in the DRS. Consistently each time we empty them as we record all the dates and numbers

 

[Martins]

That looks a heck of a lot better than the old black face panels, you did good.
I was at a car wash not too long ago waiting for the owner so I could fix his changer. The front of the DRS changer had a black face panel that was broken, duct taped, looked really bad, kind of like Martins picture of the black RNS face panel. While I was standing there a customer came up and looked at the front of the changer and said “It doesn’t look like this machine works I’m going somewhere else” and he walked off. This goes to show you what the public perception is, if it’s clean and shiny they’ll try it, if it looks like crap they’ll probably take a walk. I told the owner that he need a new face panel and what it was going to cost and said it was too expensive.

The only thing you left out was the Out of service lamp HCP470080 and Tinnerman speed nut HCP470080A. The HCP962083B is the blue denomination label kit.
I've sold a lot of those face panels over the years fo both ACW's and bill changers, looks are everything for the customer.

do you by chance know the pn for the cage/guide that bolts to where the coins drop so they dont pop back out? my old machine didnt have one and i would like to add it.

 

[Randy]

do you by chance know the pn for the cage/guide that bolts to where the coins drop so they dont pop back out? my old machine didnt have one and i would like to add it.

Most of the older changers didn't have the studs to bolt on the coin cup guard. You might want to check and see if you have the studs to bolt it on.

 

[Martins]

Most of the older changers didn't have the studs to bolt on the coin cup guard. You might want to check and see if you have the studs to bolt it on.

i have a welder! haha. i cant find the p/n anywhere even in the books.

 

[Randy]

The one you want for the RNS changer is a #60-0347A. I have a couple for the DRS Changer #60-0346A and 1 for the ER-60 changer #60-0349A