Identifying vacuum/coin acceptor

[MEP001]

Does anyone know what type of coin acceptor will replace this? I know the pics aren't great but it was a struggle just to get these from the guy.

 

[soapy]

I think a secure coin short drop should work.

 

[Earl Weiss]

You might be able to use this but note coin slot is at an angle.

https://www.kleen-ritecorp.com/p-12...n-acceptor-a5-for-air-machine-us-quarter.aspx

 

[MEP001]

You might be able to use this but note coin slot is at an angle.

https://www.kleen-ritecorp.com/p-12...n-acceptor-a5-for-air-machine-us-quarter.aspx

That's what I was thinking he'd need - I'll try to get him to send a picture of the front of the door.

 

[Randy]

I’ve seen those coin acceptors before. It was so long ago I can’t remember who made them, I think they came from Germany. He might have to have a new face plate made and use something like a short drop Slugbuster or Secure coin coin acceptor, that’s probably not what he’ll want to here.

 

[cantbreak80]

Its a Keltner Research coin acceptor for vacuums. You might be able to find one from old stock at a Denver area distributor...HPWS, Dixmor.

 

[MEP001]

Its a Keltner Research coin acceptor for vacuums. You might be able to find one from old stock at a Denver area distributor...HPWS, Dixmor.

That's about all I knew, he was looking for a Keltner VA-3 but it turned out to be the acceptor since the timer runs by jumping the coin inputs. If need be I'm sure I can get a plate made cheap and put a short-drop acceptor on it.