Idx bt902

[MudMoney]

Are the LED segments in the Big Time Display a proprietary part? If not, where else can they be purchased? Is there a way to test the individual segments?

 

[MEP001]

I get them from mouser.com, they're $5 apiece if you get 10 or more. IDX charges $36 each.

Change all of them at once in a unit, otherwise the newer ones will fail very quickly.

 

[MudMoney]

MEPOO1
That's what I wanted to know.Thank-you

 

[RAATCB]

I get them from mouser.com, they're $5 apiece if you get 10 or more. IDX charges $36 each.

Change all of them at once in a unit, otherwise the newer ones will fail very quickly.

Can you give me a part number from mouser.com? Is this for the IDX BT912 (Big Two Timer) ? I have 11 units that some segments need replacing.

Also I have a Dixmor DX2002 in my bays. I usually buy those segments from Dixmor for $5 each. Does mouser sell them at a better price? Part number?

 

[MEP001]

If the units in question have Kingbright LED panels, the part number is on the back. I don't know what the DX2002 uses, and I don't know the IDX part number without opening one up.

 

[MudMoney]

RAATCB
Im using the Bt902,mouser # 604-ta-11ewa. IDX is using Kingbrite # Ta20-11ewa I paid 3.30 each ,saved a lot and decide to replace them all as this is a huge savings.

 

[RAATCB]

RAATCB
Im using the Bt902,mouser # 604-ta-11ewa. IDX is using Kingbrite # Ta20-11ewa I paid 3.30 each ,saved a lot and decide to replace
them all as this is a huge savings.

Thank you very much. I also use Dixmor DX2002 timers. Do you know where I can buy those led segments? Part number?

 

[MudMoney]

Check the above post for the vender.

 

[RAATCB]

Isn't that LED segment for only IDX Big Two Timer? Which part number is for Dixmor DX2002? Sorry i'm a little confused.