Would anyone have a manual or could you explain this setup? Mainly wondering what the pressure switch and timer are for.
https://imgur.com/a/73cyMWK
https://imgur.com/a/73cyMWK
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Info on this RO machine
- Thread starter APW
- Start date
MEP001
Well-known member
https://www.kleen-ritecorp.com/p-24000-idx-mx8-controller.aspx
Or:
https://www.kleen-ritecorp.com/p-1014-ginsan-gs-16d-multiplex-control-with-delay.aspx
The IDX is more hearty and about half the price.
Or:
https://www.kleen-ritecorp.com/p-1014-ginsan-gs-16d-multiplex-control-with-delay.aspx
The IDX is more hearty and about half the price.
Last edited:
MEP001
Well-known member
https://www.kleen-ritecorp.com/p-1850-kip-solenoids-18-24v-metering-none-orifice-332.aspx
That one can handle opening at 250 PSI. It's the closest match to what you have except for the 1/8" NPT ports. If you don't want to lose flow, use this one:
https://www.kleen-ritecorp.com/p-4352-38-2-way-solenoid-normally-closed-24v-1200psi.aspx
That one can handle opening at 250 PSI. It's the closest match to what you have except for the 1/8" NPT ports. If you don't want to lose flow, use this one:
https://www.kleen-ritecorp.com/p-4352-38-2-way-solenoid-normally-closed-24v-1200psi.aspx
