What's new

Installing larger meter boxes

Etowah

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
I'm amazed at the order of the order of some car washes. For example the car wash these boxes came from had this for order of functions: Soap, Tire Cleaner, Foam Brush, Rinse, Wax, Presoak, Rinse. I have seen worse but this is pretty goofy where the presoak is and no spot free but has tire cleaner?
I've seen some weird ones too. A lot of the time it's because they've added features over years and just put them on the dial where they had space, I guess not ever considering just wiring up a new switch harness.

Here's another option vs. welding in studs:
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,607
Reaction score
1,388
Points
113
Location
Ohio
I've seen some weird ones too. A lot of the time it's because they've added features over years and just put them on the dial where they had space, I guess not ever considering just wiring up a new switch harness.

Here's another option vs. welding in studs:

I have seen those installed in things and didn't think of those for this project. You have given me several options to look into that are alternatives for welded studs.
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,607
Reaction score
1,388
Points
113
Location
Ohio
Here is a big box from IDX we have installed for customers. One does have bill acceptor. I know they have a box which is like this but turned sideways. Makes it easy to work on components.

Those are some huge boxes and some serious thick material.
 

pejota81

New member
Joined
Nov 15, 2024
Messages
2
Reaction score
1
Points
1
What have yall paid to have the openings made bigger in the block columns? Or has it been part of the cost of the bigger meter boxes?
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,607
Reaction score
1,388
Points
113
Location
Ohio
What have yall paid to have the openings made bigger in the block columns? Or has it been part of the cost of the bigger meter boxes?

I'm not sure because our cost was wrapped into a very large remodel. The mason tore ours down to the bottom of the boxes and relayed them instead of trying to cut the openings.
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,607
Reaction score
1,388
Points
113
Location
Ohio
I like the "inactive" labeling. Did that eliminate most of the calls for not pushing the stop button?

We just opened the self serve (after being closed for a year 😞 ) not quite four weeks ago. Not one time have we found the bay left on. We think it's because of the big red button in the door instead of the little green button in the swiper. I installed flush black colored buttons in the swipers and did not wire them.
 

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,607
Reaction score
1,388
Points
113
Location
Ohio
I can't believe I started this thread five and a half years ago. 😂 Where did the time go? Freaking nuts!
 
Top