soonermajic
Well-known member
Is there a standard or most accepted, size of bolt & nut, for hanging Laurel Vendors?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Is there a standard bolt/ nut for Laurel vendors
- Thread starter soonermajic
- Start date
MEP001
Well-known member
FWIW I've not had good luck with the Red Head brand anchors. I get wedge anchors from a local bolt supply that have never given me problems. Keep in mind wedge anchors like that won't work in cinder block or brick with voids, and they don't hold very well in solid concrete block, should be fine for a vendor but they won't hold their rated weight.
I hang vendors with 5/16" high quality (not the cheap smooth type) plastic insert anchor with a 1/4" stainless screw. They'll hold in hollow cinder block since they expand inside the void.
I hang vendors with 5/16" high quality (not the cheap smooth type) plastic insert anchor with a 1/4" stainless screw. They'll hold in hollow cinder block since they expand inside the void.
Earl Weiss
Well-known member
If block is hollow I tend to use threaded rod all the way thru the wall with a fender washer on the inside.
