What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Kip solenoid question.

1carwash1

Member
Does anybody know the dimensions of the individual stainless Kip solenoids that KR sells? I’m trying to configure a custom manifold and need that height. Also, do the individual Kip solenoids have a dedicated input/output port. Can the coil be rotated around the solenoid shaft?
 
It's 2 5/16" tall, the base is 1 1/8" wide. Yes, the in/out are dedicated, but you can use them in reverse if there's no pressure like the soap/wax supply to the pump. I run them reversed there so I don't need a check valve to keep city pressure rinse from backing up through them. The coil can be turned freely.
 
Back
Top