Kip solenoid question.

[1carwash1]

Does anybody know the dimensions of the individual stainless Kip solenoids that KR sells? I’m trying to configure a custom manifold and need that height. Also, do the individual Kip solenoids have a dedicated input/output port. Can the coil be rotated around the solenoid shaft?

 

[MEP001]

It's 2 5/16" tall, the base is 1 1/8" wide. Yes, the in/out are dedicated, but you can use them in reverse if there's no pressure like the soap/wax supply to the pump. I run them reversed there so I don't need a check valve to keep city pressure rinse from backing up through them. The coil can be turned freely.

 

[Randy]

Here’s link to the Norgren/KIP web site https://www.norgren.com/us/en/list/fluid-control-valves/kip-fluid-control-valves You can find all the technical information on all of the KIP valves of that link