kingsgatecarwash
New member
I am perplexed. Just like the title states, I have a problem where the carraige is suddenly over running, (like it has low air in the tires) and the rear prox is seeing the front flag, thereby stopping the machine, and also not allowing the joystick to move the carraige back. (until I unplug the rear prox). At the same time this problem occured, I also am having a problem with the arch over rotating. Sometimes it will go the 45 degrees as it should, but then other times it will over rotate by 10-15 degrees. Same with the carriage, sometimes it will stop in time, sometimes it will not. (more over rotate and over run than not). I have checked all proximity switches, and they seem to be functioning perfectly, and checked all the flags (on the arch and the rail). Nothing seems to be out of order. And the tires are at the correct pressure.
It is going to be a beautiful day (finally) tomorrow, and would sincerely appreciate any ideas. Oh- I have also checked all the wires in the control box, and they seem to all be connected and tight.
HELP! I know someone has probably had the same problem. I dont think it is a coincidence that they are both happening concurently.
Thanks!
Charlie
It is going to be a beautiful day (finally) tomorrow, and would sincerely appreciate any ideas. Oh- I have also checked all the wires in the control box, and they seem to all be connected and tight.
HELP! I know someone has probably had the same problem. I dont think it is a coincidence that they are both happening concurently.
Thanks!
Charlie