Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Last coin alert beeper
- Thread starter Don B.
- Start date
Yeah, that’s an idea. One on the opposite side of the box. That would probably be the easiest route. That should make it louder!
MEP001
Well-known member
That will surely draw too much current.
Yeah, you’re right. Probably wouldn’t of done that anyway. I will probably try adding another one. That should work. Unless you think two of them will draw too much current.
The “Intervo BRP4535S-12-C” horn is the horn that we’ve been using forever. I don’t have any problems not hearing it. I do have one bay that has a different horn in it that doesn’t have screw terminals on it, it’s soldered on the wires and I think it’s a little bigger than the Intervo horn. I’ll try to remember to look at it next time I’m at the car wash. We don't hangout at the car wash but I’ve noticed that a lot people get annoyed when the beeper goes off.
Here's a link to the spec's on Intervo beeper https://us.rs-online.com/product/ic...c&utm_content=Parts | ICC Intervox | 70115826
Here's a link to the spec's on Intervo beeper https://us.rs-online.com/product/ic...c&utm_content=Parts | ICC Intervox | 70115826
Last edited:
That’s the one I’m using.
100db is pretty loud at 3 meters. I've never pay much attention to the beeper when the high pressure is on. We use the remote to wash out the bay with the timer set at 10 minutes so we are done washing out the bay when the beeper goes off.
I know that, it was a test to see how long it would be before someone caught on.
I haven’t been on the forum in a while. Life gets in the way. A lot of things going on, stressful things.
Anyhow, an update on my beeper problem. I added another beeper in the meter box and tried two together. That didn’t work! In fact, with two, it changed the tone of them and actually made them sound a little weaker. I guess the output didn’t have enough current to run two of them. I wound up pulling them out of the meter boxes and putting them in their own enclosure and mounting them on the wall beside the timer. Much, much louder now.
No problem hearing them now, even when using the high pressure spray. I talked to dixmor, and they told me that the beeper would be too muffled inside of the coin meter box and recommended that I put them in an enclosure on the wall with the face of the beeper opened up to the outside. That cured the problem!
Anyhow, an update on my beeper problem. I added another beeper in the meter box and tried two together. That didn’t work! In fact, with two, it changed the tone of them and actually made them sound a little weaker. I guess the output didn’t have enough current to run two of them. I wound up pulling them out of the meter boxes and putting them in their own enclosure and mounting them on the wall beside the timer. Much, much louder now.
No problem hearing them now, even when using the high pressure spray. I talked to dixmor, and they told me that the beeper would be too muffled inside of the coin meter box and recommended that I put them in an enclosure on the wall with the face of the beeper opened up to the outside. That cured the problem!
Attachments
Well, as cheap as the horns are, I don’t mind if I have to change one every once in a while. You could change one out in five minutes! The horn works OK in the coin box unless they’re using the high pressure spray, that’s where I got the complaints that you couldn’t hear it! And it was true, because I couldn’t hear it either when I washed my pick up with the high-pressure spray on. Especially if I was on the opposite side of the vehicle! But I don’t have to worry about it now, you can hear it all over the washbay! Thats all I was after!
No I haven’t tried them. Are they 12V DC?
