Lava product
- Thread starter benny2
- Start date
Earl Weiss
Well-known member
- Joined
- Aug 31, 2007
- Messages
- 6,372
- Reaction score
- 943
- Points
- 113
https://www.youtube.com/watch?v=6a7Vnh4dypI
https://www.youtube.com/watch?v=CmOOopvTuQg
https://www.youtube.com/watch?v=hJ8z5Klq2W4&t=6s
I use a DIY version for soap at the entrance. Use KR low PH.
One Flo Jet at 15 PSI for supply and a Vac Motor for air.
Low cost product plenty of how. This service is applied on all cars.
https://www.youtube.com/watch?v=CmOOopvTuQg
https://www.youtube.com/watch?v=hJ8z5Klq2W4&t=6s
I use a DIY version for soap at the entrance. Use KR low PH.
One Flo Jet at 15 PSI for supply and a Vac Motor for air.
Low cost product plenty of how. This service is applied on all cars.
TEEBOX
Member
https://www.youtube.com/watch?v=LgqSXuVmyV0
I use 3 flojets and hydrominders, pink tip all year except in winter. Comes in thicker so I use a purple or Aqua Tip.
I use Opta Kleen 3 from Warsaw Carwash Products. Haven't tried KR.
Also, This is a low PH high foaming product.
Everyone gets it! It help me move my starting express wash up a dollar! No complaints.
I use 3 flojets and hydrominders, pink tip all year except in winter. Comes in thicker so I use a purple or Aqua Tip.
I use Opta Kleen 3 from Warsaw Carwash Products. Haven't tried KR.
Also, This is a low PH high foaming product.
Everyone gets it! It help me move my starting express wash up a dollar! No complaints.
Earl Weiss
Well-known member
- Joined
- Aug 31, 2007
- Messages
- 6,372
- Reaction score
- 943
- Points
- 113
What is your cost per car?
TEEBOX
Member
I switched over to using Mr. Foamer's foaming generators which brought down the cost to 4 cents per application. However, Earl I know you use them as well. Have you noticed any cracks in the plastic housing on the generators?
Earl Weiss
Well-known member
- Joined
- Aug 31, 2007
- Messages
- 6,372
- Reaction score
- 943
- Points
- 113
I have not noticed any cracks , Funny thing. My Generators have the screw on cap at the bottom, When i re did one place my installer said they were upside down because they had trouble with them leaking the other way. I have 3 pairs at 4 locations and no leaks. So, perhaps they had a bad batch here or there. I would ask them to warranty if there were no impacts to the unit.
