LED6 Programming

[JoshsWashes]

I am just getting ready to install my cryptopay units in count up so I went and purchased LED6 timers and the programming guide lacks some information. The factory default is $2 for 4 minutes, I want to set it up for $2.00 for 3 minutes and each additional coin 35 seconds? So do I adjust C: to 23 and then add the extra seconds to the bonus time?

Thanks for your help!!

 

[MEP001]

No, bonus time is for the bonus coin setting, one that when reached you can give either a lump of bonus time or some bonus time per coin when it's reached. You'll set C: to 23 and S: to 008.

http://www.dixmor.com/TIMER PDF/LED6 INSTR.pdf

 

[JoshsWashes]

No, bonus time is for the bonus coin setting, one that when reached you can give either a lump of bonus time or some bonus time per coin when it's reached. You'll set C: to 23 and S: to 008.

http://www.dixmor.com/TIMER PDF/LED6 INSTR.pdf

ok I set the C:23 (3:04) to start and then S:3 Bxxx 9 (bonus starts on coin 9) Bonus time to 35 and then set the bonus to multiple bonus.

Seems to be working as intended!

Now on to the cryptopay install!!

 

[MEP001]

ok I set the C:23 (3:04) to start and then S:3 Bxxx 9 (bonus starts on coin 9) Bonus time to 35 and then set the bonus to multiple bonus.

That's correct, sorry, I missed the part that you wanted to give more time per coin after startup or I would've mentioned the multiple bonus part.

 

[JoshsWashes]

Do you know is there a way to make it land right on 3:00? It's either 2:56 or 3:04 the way it is.

 

[GoBuckeyes]

Do you know is there a way to make it land right on 3:00? It's either 2:56 or 3:04 the way it is.

For your price/time combo there is not. Three minutes is 180 seconds divided by 8 coins is 22.5 seconds per coin.

 

[MEP001]

The big Dixmor timers let you set the exact start time, the LED6 is only time per coin.

I'd start it at 3:04 and not worry about it.