soonermajic
Well-known member
Does anyone know what item it is, from KR, on the entry/exit prox switches? I bet my distributor would tell me but they're gonna tell me a crazy price to...
LW 4000 rear/exit prox switches. Help
- Thread starter soonermajic
- Start date
washnvac
Well-known member
You mean the photo eyes on the t-bar, or the loading eyes on the virtual treadle?
soonermajic
Well-known member
The 30mm prox switches on the outside edge of the bridge, on passenger side.
washnvac
Well-known member
I use these (they are shielded):
https://www.zoro.com/telemecanique-...mm-npn-no-xs630b1nam12/i/G1170154/?q=g1170154
With the 20% off you can get with a zoro coupon they are $65.52. KR has them for $85.16. When I bought the wash that has lasers, a couple of the proxs were unshiedled, but I found they would occasionally pick up the mounting bolts. So I switched to shielded. I have had no issues with the shielded.
https://www.zoro.com/telemecanique-...mm-npn-no-xs630b1nam12/i/G1170154/?q=g1170154
With the 20% off you can get with a zoro coupon they are $65.52. KR has them for $85.16. When I bought the wash that has lasers, a couple of the proxs were unshiedled, but I found they would occasionally pick up the mounting bolts. So I switched to shielded. I have had no issues with the shielded.
soonermajic
Well-known member
Would you know the KR part #? I need it tomorrow, live close to KR, & dont care if it costs little more.
My bridge dam near shot off the entry end of the rails. If it hadn't have been for the stoppers, it would've rocketed off there.!!!
My bridge dam near shot off the entry end of the rails. If it hadn't have been for the stoppers, it would've rocketed off there.!!!
MEP001
Well-known member
https://car-wash.kleen-ritecorp.com/search?w=XS630B1NAM12
All you have to do is search the manufacturer's part number on Kleen-Rite's site.
All you have to do is search the manufacturer's part number on Kleen-Rite's site.
washnvac
Well-known member
STP2120 for $85.16
