Manifold Pics and Diagrams

[UtahYoutubeGuy]

Do any of you guys have pictures and/or diagrams of how your manifolds are setup above each bay?

The wash I am bringing back from the dead was half torn apart when I got in and all of the chemical was going in the ER. This is a 5 bay setup and so having it injected in the attic will be ideal for delivery speed to wand and brush.

 

[Randy]

Check out this post https://www.carwashforum.com/threads/chemical-tee-manifold-advise.16341/
We have all of our manifolds in the equipment room as there isn't muck access above the bays, it seems to work fine. It's only been that way 35 years.

 

[Martins]

Here is my current hp set up done before i bought it however seems to work just fine. Every line is check valved other then the hp line

 

[mjwalsh]

I concur with Martin's setup by each bay's overhead boom. It would be good to have an update on which specific brand & model of check valve seems to last the longest???

It has been so long since we had to replace our Swageloks ... I am not sure how much the current cost for those are. If I remember correctly they tended to be more expensive than most check valves.