What's new

mark 7 auqajet 300

steve jump

New member
Joined
Feb 1, 2016
Messages
3
Reaction score
0
Points
1
Location
United States
I've been down for 3 weeks...get a code coo...impeaded travel of gantry any pass but first...need help please
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,046
Reaction score
1,684
Points
113
Location
Orange, MA
what does mark 7 say? seems you should be able to get tech support from them?
 

mac

Well-known member
Joined
Sep 3, 2007
Messages
3,558
Reaction score
791
Points
113
Ah the legendary Mark7 service strikes again. You might try Landons. He sell and stocks many of those parts. 800 467 2690
 

chaz

Active member
Joined
Mar 22, 2008
Messages
919
Reaction score
110
Points
43
Location
Cincinnati, Ohio
I'm guessing you've got a bad prox sensor. I'd try the entrance end sensor on the passenger side.

I'm not sure how you can aford to be down for three weeks. Sounds like you need to make up with MarkVII or find a good distributor that will (sell) you phone support and parts.
 

I.B. Washincars

Car Washer Emeritus
Joined
Aug 30, 2007
Messages
4,284
Reaction score
1,163
Points
113
Location
SW Indiana melon fields.
I don't see how an entrance end prox could cause an impeded problem. Possibly the prox on the star wheel. There could be an inverter problem, or the gantry could actually be impeded (axle bearings, gear box, motor, tracks moving around on floor, etc.)
 

chaz

Active member
Joined
Mar 22, 2008
Messages
919
Reaction score
110
Points
43
Location
Cincinnati, Ohio
Star wheel is a good thought. Sounds like it's not actually impeded as it's an error code on all but first pass. Good thing I've got Brain on my side.
 

DDWASH

New member
Joined
Jun 19, 2013
Messages
3
Reaction score
0
Points
1
Location
centralia, mo. 65240
if I remember right when mine does that the travel limit sensor was going bad was not reading when it got to the end of the track, step on pad and let the wash move to the end of the track see if horn goes off if it does not go off try adjusting the sensor closer to the metal pad or replace sensor. (passenger side bottom right)
 

mac

Well-known member
Joined
Sep 3, 2007
Messages
3,558
Reaction score
791
Points
113
Steve, are you located in FL? We just helped a Mark 7 operator that could not get the factory to send a tech for 3 weeks. And according to the wash manager, he requested that they send a different tech than the last one. Won't go into the details of why, since it's considered hearsay, but I love hearing these stories about my competitors.
 
Top