What's new

Mark7 Turbowash

JustClean

Active member
Joined
Mar 24, 2008
Messages
845
Reaction score
99
Points
28
Location
all over the place
Hi guys,
has anyone some input on the Mark7 Turbowash? I got a phone call from a rep telling me about this machine. It has an inverted L. I can't see it any better than whatever is on the market right now...
Thanks a lot. Cheers Justclean
 

I.B. Washincars

Car Washer Emeritus
Joined
Aug 30, 2007
Messages
4,284
Reaction score
1,163
Points
113
Location
SW Indiana melon fields.
There is one in New Albany, IN. It's on Vincennes St., I think at the corner of Elm. I stopped in as they were installing it (July 8). Most everything was installed and they had it running back and forth. They were plumbing it up while I was there, so I would think it is running by now. The main difference I could see was that it uses turbo nozzles and when it washes the front and back the upper nozzles turn off. I'm sure the next time I am there I will have to give it a try.
 

JustClean

Active member
Joined
Mar 24, 2008
Messages
845
Reaction score
99
Points
28
Location
all over the place
The vehicle height is better. I wonder if the downside is cleaning the bonnet or if the turbo nozzles will make up for it. Well, it's a brand new machine and the first with an inverted L from Mark7. Please, IB, let us know what you think next time you use it. :)
 

Bill Manke

Member
Joined
Aug 30, 2007
Messages
191
Reaction score
1
Points
18
Location
Reno Nv
I had a jet clean back in about 1988. It lasted for about a year then switched to the rotoclean. Rotoclean wash a much better machine. Funny tory with jet clean. I was working on the drive wheels on the rail trying to get it to track right. Had the bay blocked off with a cone but had the power on. Had somebody come up move cone and put money in for a wash. I didn't see this until they were in the bay. I was up on the rail my ladder was back in the corner. so as the carriage drove around the rail I ran infront of it to my ladder. I also made this bay just big enough for the wash so over the years as I have up graded to GTO 300 I had to shave the walls with a grinder to gain as much clearance as possible.
 
Top