Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Need a guide bracket for top brush on Mark7 Softwash
- Thread starter DavidM
- Start date
I.B. Washincars
Car Washer Emeritus
I have broken two on my machine. The first time they had to order it, but the last time they had it in stock. You may give them a shout and see if they can help you out. They also parted out a machine a few months back.
Eagle Express Wash Systems, New Albany, IN. 812-948-1200. Steve is the parts man. He may be off this week. I called today and he wasn't there, but someone else will be able to help you.
BTW, the first one I broke on the weekend before Christmas and being down wasn't an option. I called a local welder on Sunday morning and he welded it back together and got me going.
Eagle Express Wash Systems, New Albany, IN. 812-948-1200. Steve is the parts man. He may be off this week. I called today and he wasn't there, but someone else will be able to help you.
BTW, the first one I broke on the weekend before Christmas and being down wasn't an option. I called a local welder on Sunday morning and he welded it back together and got me going.
Thanks for the suggestion. I actually called them last week and ordered one. They overnighted it for me and my distributor installed it Friday. On Saturday the kevlar belt let loose (didn't break) and allowed the brush to free fall and breaking both the right and left guides again.
Our service tech said the couldn't be welded but our welder said they can so he welded them and we are putting them back on.
Any idea why these guides break?
Any idea what our distributor may have done wrong when reassembling that caused the second failure? They don't seem to think it was their fault. It did wash about 50 cars between their repair and the failure.
David
Our service tech said the couldn't be welded but our welder said they can so he welded them and we are putting them back on.
Any idea why these guides break?
Any idea what our distributor may have done wrong when reassembling that caused the second failure? They don't seem to think it was their fault. It did wash about 50 cars between their repair and the failure.
David
