Need cat 310 with 5 Hp motor Drawing

[Charlies]

I want to build myself a new pump stand. And wondering if anybody has a drawing that shows where all the holes need to be on the plate to mount the pump and motor.

Thanks,
Mike

 

[Carwashking]

I want to build myself a new pump stand. And wondering if anybody has a drawing that shows where all the holes need to be on the plate to mount the pump and motor.

Thanks,
Mike

I built my pump stands if I have time I can see if western sheet metal provide me the drawings

 

[Carwashking]

 

[Carwashking]

 

[Carwashking]

 

[Charlies]

I built my pump stands if I have time I can see if western sheet metal provide me the drawings

Thanks that would be awesome

 

[wrightwash]

I have the 3D CAD on the 310 pump, I could make you a drawing if needed. Do you know the frame size of your motor? It should be a 184T if its a 5hp 3ph.

 

[Charlies]

Thanks. It’s a 5hp 184t

 

[wrightwash]

The 184T is 5.5" x 7.5" and the thru hole on the feet is .41, clearance for a 3/8"

I like to use a jack screw base for belt-tightening, this is the one I use: https://www.automationdirect.com/ad...MImoudu7aFggMVNzfUAR26fgFnEAQYASABEgJVePD_BwE

 

[Carwashking]

This is the drawing for our motor plates.
call me for question 214-718-4550

 

[Charlies]

This is the drawing for our motor plates.
call me for question 214-718-4550

I’m sorry I did t see this until today.
Thanks for your help.

I just started designing my own stand in solid worlds. This is very helpful.

 

[Charlies]