What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Need to replace the hex drive bolt behind Medeco.

jkxmlr

New member
What I need is what size wrench fits the nut? This is the 1 1/8th shell. Has SS strap welded around it. Will probably have to fabricate it as I don't think anything normal will fit. What have others done? Thanks in advance.medeco.jpg
 
If it's in a round safe head, you won't get a socket on it. You'll have to use a screwdriver or a punch to loosen it.
 
ACW door. Bolt got cross threaded and barely catches. Tried using a punch, but it was starting to screw up corner of nut.
 
ACW door. Bolt got cross threaded and barely catches. Tried using a punch, but it was starting to screw up corner of nut.
I've never had a problem getting those nuts off the ACW door or a bill changer. Use a punch and keep tapping it. When you replace the bolt also replace the spring nut on the body of the ACW. If you mess up the nut, I might have a few, along with the nut and bolt.
 
Got changed this morning. Better hammer and punch and a little more determination. Only changed the bolt so far. Thanks for the help.
 
Back
Top