CLEARVIEW CARWASH
New member
Guys,
Please forgive me for asking stupid questions, but I really need help.
I have a D&S 5000. I am having a few issues I could use some help with.
First issue is that when presoak is being applied two of the jets on the passenger side seem to be dripping the presoak as opposed to spraying. The car gets really soaked, but I think it's wasting the presoak. The problem is that the last time I had my chemical supplier/repair company there is when this started happening. Now they are telling me I need some kind of pump to the tune of 7-800 dollars. Apparently, I don't know what happened, but it wasn't doing that before. They also supply my chemicals so I am a little leary about asking them for advice right now. I guess I would like to know if there is a way to correct this myself. I have tried adjusting the pressure on the presoak applications, but i don't see any change.
The next concern is that I am going to try and shut down my spot free rinse. I have been told it wastes one gallon of fresh water for every gallon of spot free it makes. That seems extremely wasteful. I am in Georgia, and we have a drought situation, so I am going to try something different. I have ordered Kleen Seal with teflon from Kleen-Rite. I was using berry dry. I would like to know how to incorporate the Kleen seal into my rinse if I don't use the spot free.
I really need some help here guys. Please walk me through this.
Also can anyone offer some advice on what pressures the regulators on the board should be set to for all applications?
Please forgive me for asking stupid questions, but I really need help.
I have a D&S 5000. I am having a few issues I could use some help with.
First issue is that when presoak is being applied two of the jets on the passenger side seem to be dripping the presoak as opposed to spraying. The car gets really soaked, but I think it's wasting the presoak. The problem is that the last time I had my chemical supplier/repair company there is when this started happening. Now they are telling me I need some kind of pump to the tune of 7-800 dollars. Apparently, I don't know what happened, but it wasn't doing that before. They also supply my chemicals so I am a little leary about asking them for advice right now. I guess I would like to know if there is a way to correct this myself. I have tried adjusting the pressure on the presoak applications, but i don't see any change.
The next concern is that I am going to try and shut down my spot free rinse. I have been told it wastes one gallon of fresh water for every gallon of spot free it makes. That seems extremely wasteful. I am in Georgia, and we have a drought situation, so I am going to try something different. I have ordered Kleen Seal with teflon from Kleen-Rite. I was using berry dry. I would like to know how to incorporate the Kleen seal into my rinse if I don't use the spot free.
I really need some help here guys. Please walk me through this.
Also can anyone offer some advice on what pressures the regulators on the board should be set to for all applications?