What's new

Presoak chemicals

Detbjr

Member
Joined
Dec 30, 2021
Messages
44
Reaction score
5
Points
8
Hi all
Looking for a recommendation on a presoak chemical to use in a self-serve. I have a Ryko signature series pump bench - 4 bays. My chemicals run through the high pressure wand and the presoak cycle triggers a solenoid for low pressure - 100 to 500 psi depending on how I set the regulator.
I’m looking for something that gives a good visual show and also cleans really well Ideally would be hyper concentrated to minimize equipment room space

Also welcome input on tire/bug cleaner- that’s another cycle at 50 psi.

Not impressed with current chemicals.

Thank you!
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,369
Reaction score
941
Points
113
I use KR low PH. Issue with SS is since the Public is using it the product has to be foolproof safe which also means the cleaning effect is somewhat limited.
 

tdlconceptsllc

Well-known member
Joined
Jul 30, 2013
Messages
1,060
Reaction score
427
Points
83
Location
NC
Presoak is a tough product to run at 100-500psi. Are you running it through High pressure pump or Low pressure with flowjet that's a Major difference.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Presoak is a tough product to run at 100-500psi. Are you running it through High pressure pump or Low pressure with flowjet that's a Major difference.
He's running it through the high pressure pump at a reduced pressure, so no way to add air with it.
 

Greg Pack

Wash Weenie
Joined
Sep 3, 2007
Messages
4,391
Reaction score
2,169
Points
113
Location
Hoover, Alabama
I often run a presoak in my medium pressure application (coleman pump unit) is designed for touch free IBAs. Never had any damage claims or issue. If it doesn't feel slimy/slippery in my hand out of the nozzle it's likely not alkaline enough to clean road film at my wash. Low pressure presoak is a more effective option
 

Ryancross11

Member
Joined
Apr 2, 2022
Messages
42
Reaction score
27
Points
18
I ran my presoak through a triple foam gun. Run it with air. Foams up really nice. One of my biggest used functions. KR purple passion.
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,858
Reaction score
2,208
Points
113
I run my Presoak out at 110 – 125psi with a Procon pump with no air assist. We use “Correct” power presoak from Kleen-Rite that we are running out at 36-1 with a Tan tip in the 511 Hydrominder. We used to use “Super Wash” from Kleen-Rite and it worked really well until they changed to another supplier and it doesn’t work as well as the original “Super Wash” did.
 
Top